|Taint Tabor, Tense, Talon, Tann, Taldon, Taldork, Telic, Twitch and Shredded / Copper / based extrusion scraps.
Clean Mixed Old Alloy Sheet Aluminum
Shall consist of clean old alloy aluminium sheet and sheet utensil scrap of two or more alloys free of 7000 alloy series, foil, Venetian blinds, castings, hair wire screen wire food or beverage containers, pie plates, hub caps, radiator shells, airplane sheet foil, oil cans, bottle caps, plastic dirt and other foreign substance. Oil grease not to total more than 1% upto 10% painted sheet, siding and awnings permitted.
New Pure Aluminium Wire and Cable
Shall consist of new unalloyed aluminum wire or cable free from hair wire, wire screen , iron, insulation and any other foreign substance.
New Mixed Aluminium Wire and Cable
Shall consist of new clean unalloyed aluminium wire or cable which may contain upto 10% 6000 series wire and cable free from hair wire, wire screen, iron, insulation and any other foreign substance.
Baled Luminium Used Beverage Can Scarp
Shall have a minimum density if 14 lbs per cubic foot and a maximum density of 17 lbs per cubic foot for unflattened UBC and 22 lbs. per cubic foot for flattened UBC. Size minimum 30 cubic feet with bale range dimensions of 24” to 40” by 30” to 52” by 40” to 84”. The only acceptable tieing method shall be as follows: four to six 5/8” X 0.20: steel bands or six to ten # 13 gauge steel wires (aluminium bands or wires are acceptable in equivalent strength and number). Use of skids and/or support sheets of any material are not acceptable. Must be magnetically separated material and free of steel, lead, bottle caps, plastic cans and other plastics, glass, wood, dirt, grease, trash and other foreign substances. Any free lead is basis for rejection. Any and all aluminum items, other than used beverage cans, are not acceptable. Items not covered in the specification are subject to special arrangement between buyer and seller.
Briquette Aluminum Used Beverage Can (UBC) Scrap
Shall have a Briquette density of 50 pounds per cubic foot minimum. Nominal briquette size shall range from 12 to 24 inches X 12 to 24 inches in uniform profile with a variable length of 8 inches minimum and 48 inches maximum. Briquettes shall be bundles or stacked on skids and secured with a minimum of one girth band per horizontal layer. Briquettes not to overhang pallet. Total package height shall be 48 inches maximum. Banding shall be at least 5/8” wide by 0.020” thick steel strapping or equivalent strength. The weight of any bundle shall not exceed 4000 pounds. Material must be magnetically separated and free of steel, plastic, glass, dirt and all other foreign substances. And any all aluminium items other than UBC are unacceptable. Any free lead is a basis for rejection. Items not covered in the specification, including moisture and any variation in the specification are subject to special arrangement between buyer and seller.
Mixed Aluminium Castings
Shall consist of all clean aluminium castings which may contain auto and airplane castings but no ingot and to be free of iron, dirt, brass, Babbitt and any other foreign materials. Oil and grease not to total more than 2%.